An HTS (Harmonized Tariff Schedule) code is a 10-digit classification number used by US Customs and Border Protection to identify imported goods and determine applicable duty rates. The first 6 digits are standardized internationally under the Harmonized System, while the last 4 digits are specific to the United States.

How are US tariff rates determined?

US tariff rates are set by Congress and administered by CBP. The base MFN (Most Favored Nation) rate applies to most trading partners. Additional special tariffs — such as Section 301 (China), Section 232 (steel and aluminum), and Section 122 (temporary global surcharge, 10–15% per Proclamation 11012) — may apply on top of the base rate. Note that Section 122 does not stack with Section 232: goods already subject to §232 actions are excluded from the §122 surcharge.

What are Section 301 tariffs?

Section 301 tariffs are additional duties imposed on Chinese goods under the Trade Act of 1974, in response to unfair trade practices. They range from 7.5% to 100% depending on the product category and apply on top of the standard MFN duty rate. Four separate lists cover approximately $370 billion of annual imports.

How do I find the tariff rate for my product?

Use the search bar on this site to describe your product in plain English — our AI identifies the correct HTS code and shows all applicable duty rates including base MFN, Section 301, Section 232, and any other overlays. You can also browse by HTS chapter or product category.

What is a landed cost?

Landed cost is the total cost of importing a product to its destination, including the product price (FOB), ocean or air freight, insurance, US Customs duties, Merchandise Processing Fee (MPF), Harbor Maintenance Fee (HMF), and any other applicable surcharges. It represents the true cost of an imported good before domestic distribution.

Harmonized Tariff Schedule

Chapter 82: Tools

Name: US Tariff Rates - Chapter 82: Tools
Creator: US Tariff Rates
License: https://ustariffrates.com/terms

HTS Chapter 82 covers tools imported into the United States. Use this page to review tariff classifications, MFN duty rates, and special program rates by code.

HTS Codes in Chapter 82

264 codes

Code	Description	General Rate	Special Rate	Flags
8201	Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:	Free	-	Section 301
8201.10.00.00	Spades and shovels, and parts thereof	Free	-	Section 301
8201.30.00	Mattocks, picks, hoes and rakes, and parts thereof	Free	-	Section 301
8201.30.00.10	Mattocks and picks, and parts thereof	Free	-	Section 301
8201.30.00.80	Other	Free	-	Section 301
8201.40	Axes, bill hooks and similar hewing tools, and parts thereof:	Free	-	Section 301
8201.40.30.00	Machetes, and parts thereof	Free	-	Section 301
8201.40.60	Other	6.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8201.40.60.10	Axes and adzes, and parts thereof	Free	-	Section 301
8201.40.60.80	Other	Free	-	Section 301
8201.50.00.00	Secateurs and similar one-handed pruners and shears (including poultry shears), and parts thereof	1¢ each + 2.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8201.60.00.00	Hedge shears, two-handed pruning shears and similar two-handed shears, and parts thereof	1¢ each + 2.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8201.90	Other handtools of a kind used in agriculture, horticulture or forestry, and parts thereof:	Free	-	Section 301
8201.90.30.00	Grass shears, and parts thereof	2¢ each + 5.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8201.90.40.00	Forks, and parts thereof	Free	-	Section 301
8201.90.60.00	Other	Free	-	Section 301
8202	Handsaws, and metal parts thereof; blades for saws of all kinds (including slitting, slotting or toothless saw blades), and base metal parts thereof:	Free	-	Section 301
8202.10.00.00	Handsaws, and parts (except blades) thereof	Free	-	Section 301
8202.20.00	Bandsaw blades, and parts thereof	Free	-	Section 301
8202.20.00.30	Metal cutting blades	Free	-	Section 301
8202.20.00.60	Other	Free	-	Section 301
8202.31.00.00	With working part of steel	Free	-	Section 301
8202.39.00	Other, including parts	Free	-	Section 301
8202.39.00.10	With diamond working parts	Free	-	Section 301
8202.39.00.40	Diamond sawblade cores	Free	-	Section 301
8202.39.00.70	Other	Free	-	Section 301
8202.40	Chain saw blades, and parts thereof:	Free	-	Section 301
8202.40.30.00	With cutting parts containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	7.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8202.40.60	Other	Free	-	Section 301
8202.40.60.30	In continuous lengths	Free	-	Section 301
8202.40.60.60	Other	Free	-	Section 301
8202.91	Straight saw blades, for working metal:	Free	-	Section 301
8202.91.30.00	Hacksaw blades	Free	-	Section 301
8202.91.60.00	Other	Free	-	Section 301
8202.99.00.00	Other (including parts)	Free	-	Section 301
8203	Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof:	Free	-	Section 301
8203.10	Files, rasps and similar tools:	Free	-	Section 301
8203.10.30.00	Not over 11 cm in length	Free	-	Section 301
8203.10.60.00	Over 11 cm but not over 17 cm in length	Free	-	Section 301
8203.10.90.00	Over 17 cm in length	Free	-	Section 301
8203.20	Pliers (including cutting pliers), pincers, tweezers and similar tools, and parts thereof:	Free	-	Section 301
8203.20.20.00	Tweezers	4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8203.20.40.00	Slip joint pliers	12%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8203.20.60	Other (except parts)	12¢/doz. + 5.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8203.20.60.30	Pliers	Free	-	Section 301
8203.20.60.60	Other	Free	-	Section 301
8203.20.80.00	Parts	4.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8203.30.00.00	Metal cutting shears and similar tools, and parts thereof	Free	-	Section 301
8203.40	Pipe cutters, bolt cutters, perforating punches and similar tools, and parts thereof:	Free	-	Section 301
8203.40.30.00	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8203.40.60.00	Other (including parts)	3.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8204	Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:	Free	-	Section 301
8204.11.00	Nonadjustable, and parts thereof	9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8204.11.00.30	Open-end, box and combination open-end and box wrenches	Free	-	Section 301
8204.11.00.60	Other (including parts)	Free	-	Section 301
8204.12.00.00	Adjustable, and parts thereof	9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8204.20.00.00	Socket wrenches, with or without handles, drives and extensions, and parts thereof	9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205	Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:	Free	-	Section 301
8205.10.00.00	Drilling, threading or tapping tools, and parts thereof	6.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.20	Hammers and sledge hammers, and parts thereof:	Free	-	Section 301
8205.20.30.00	With heads not over 1.5 kg each	6.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.20.60.00	With heads over 1.5 kg each	Free	-	Section 301
8205.30	Planes, chisels, gouges and similar cutting tools for working wood, and parts thereof:	Free	-	Section 301
8205.30.30.00	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.30.60.00	Other (including parts)	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.40.00.00	Screwdrivers, and parts thereof	6.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.1% (JP)	Section 301
8205.51	Household tools, and parts thereof:	Free	-	Section 301
8205.51.15.00	Carving and butcher steels, with or without handles	Free	-	Section 301
8205.51.30	Other (including parts)	3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.51.30.30	Kitchen and table implements	Free	-	Section 301
8205.51.30.60	Other (including parts)	Free	-	Section 301
8205.51.45.00	Of copper	Free	-	Section 301
8205.51.60.00	Of aluminum	2.2¢/kg + 5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.51.75.00	Other	3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.59	Other:	Free	-	Section 301
8205.59.10.00	Pipe tools, and parts thereof	7.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.6% (JP)	Section 301
8205.59.20.00	Powder-actuated handtools, and parts thereof	Free	-	Section 301
8205.59.30	Crowbars, track tools and wedges, and parts thereof	Free	-	Section 301
8205.59.30.10	Crowbars	Free	-	Section 301
8205.59.30.80	Other	Free	-	Section 301
8205.59.45.00	Caulking guns	5.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.59.55	Other	5.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.59.55.05	Single edge razor blades other than for shaving	Free	-	Section 301
8205.59.55.10	Other	Free	-	Section 301
8205.59.55.60	Other (including parts)	Free	-	Section 301
8205.59.60.00	Of copper	Free	-	Section 301
8205.59.70.00	Of aluminum	1.5¢/kg + 3.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.59.80.00	Other	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.60.00.00	Blow torches and similar self-contained torches, and parts thereof	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.70.00	Vises, clamps and the like, and parts thereof	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8205.70.00.30	Pipe	Free	-	Section 301
8205.70.00.60	Other	Free	-	Section 301
8205.70.00.90	Other (including parts)	Free	-	Section 301
8205.90	Other, including sets of articles of two or more subheadings of this heading:	Free	-	Section 301
8205.90.10.00	Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof	Free	-	Section 301
8205.90.60.00	Sets of articles of two or more of the foregoing subheadings	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8206.00.00.00	Tools of two or more of headings 8202 to 8205, put up in sets for retail sale	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8207	Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:	Free	-	Section 301
8207.13.00.00	With working part of cermets	3.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.19	Other, including parts:	Free	-	Section 301
8207.19.30	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.19.30.30	Percussion rock drill bits	Free	-	Section 301
8207.19.30.60	Rotary rock drill bits, core bits and reamers	Free	-	Section 301
8207.19.30.90	Other	Free	-	Section 301
8207.19.60	Other	2.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.19.60.30	Percussion rock drill bits	Free	-	Section 301
8207.19.60.65	With working part of diamonds	Free	-	Section 301
8207.19.60.70	Other	Free	-	Section 301
8207.19.60.90	Other	Free	-	Section 301
8207.20.00	Dies for drawing or extruding metal, and parts thereof	3.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.20.00.30	Diamond wire drawing dies	Free	-	Section 301
8207.20.00.40	Other dies	Free	-	Section 301
8207.20.00.70	Parts	Free	-	Section 301
8207.30	Tools for pressing, stamping or punching, and parts thereof:	Free	-	Section 301
8207.30.30	Suitable for cutting metal, and parts thereof	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.85% (JP)	Section 301
8207.30.30.20	Tools	Free	-	Section 301
8207.30.30.50	Parts	Free	-	Section 301
8207.30.60	Not suitable for cutting metal, and parts thereof	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.30.60.32	Stamping dies not suitable for cutting metal	Free	-	Section 301
8207.30.60.62	Metal forming dies, including thread-rolling dies	Free	-	Section 301
8207.30.60.92	Other tools	Free	-	Section 301
8207.30.60.95	Parts	Free	-	Section 301
8207.40	Tools for tapping or threading, and parts thereof:	Free	-	Section 301
8207.40.30.00	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.85% (JP)	Section 301
8207.40.60.00	Other	4.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.50	Tools for drilling, other than for rock drilling, and parts thereof:	Free	-	Section 301
8207.50.20	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.50.20.30	Masonry drills	Free	-	Section 301
8207.50.20.45	Brad point	Free	-	Section 301
8207.50.20.55	Other	Free	-	Section 301
8207.50.20.70	For woodworking	Free	-	Section 301
8207.50.20.80	Other	Free	-	Section 301
8207.50.40	Suitable for cutting metal, and parts thereof	8.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.50.40.30	Twist drills	Free	-	Section 301
8207.50.40.60	Other	Free	-	Section 301
8207.50.60.00	For handtools, and parts thereof	5.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.50.80.00	Other	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.60.00	Tools for boring or broaching, and parts thereof	4.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.60.00.30	Broaches	Free	-	Section 301
8207.60.00.35	Reamers, except gun reamers	Free	-	Section 301
8207.60.00.61	Other (including parts thereof)	Free	-	Section 301
8207.70	Tools for milling, and parts thereof:	Free	-	Section 301
8207.70.30	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.70.30.30	End milling cutters	Free	-	Section 301
8207.70.30.40	Router bits for woodworking	Free	-	Section 301
8207.70.30.60	Other	Free	-	Section 301
8207.70.60	Other	2.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.70.60.30	End milling cutters	Free	-	Section 301
8207.70.60.40	Router bits not suitable for cutting metal	Free	-	Section 301
8207.70.60.60	Other (including parts)	Free	-	Section 301
8207.80	Tools for turning:	Free	-	Section 301
8207.80.30.00	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	4.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.80.60.00	Other	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.90	Other interchangeable tools, and parts thereof:	Free	-	Section 301
8207.90.15.00	Files and rasps, including rotary files and rasps, and parts thereof	1.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.90.30	Cutting tools with cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.90.30.30	Hobs and other gear cutting tools	Free	-	Section 301
8207.90.30.75	Cutterheads with interchangeable tools	Free	-	Section 301
8207.90.30.80	Other	Free	-	Section 301
8207.90.30.85	Other	Free	-	Section 301
8207.90.45.00	Suitable for cutting metal, and parts thereof	4.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.90.60.00	For handtools, and parts thereof	4.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.90.75	Other	3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8207.90.75.45	Cutterheads with interchangeable tools	Free	-	Section 301
8207.90.75.85	Other	Free	-	Section 301
8208	Knives and cutting blades, for machines or for mechanical appliances, and base metal parts thereof:	Free	-	Section 301
8208.10.00	For metal working, and parts thereof	Free	-	Section 301
8208.10.00.30	Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines	Free	-	Section 301
8208.10.00.60	Other (including parts)	Free	-	Section 301
8208.20.00	For wood working, and parts thereof	Free	-	Section 301
8208.20.00.30	Over 73.7 cm in length, for veneer-cutting machines	Free	-	Section 301
8208.20.00.60	Over 15.2 cm in length, for wood-chipper machines	Free	-	Section 301
8208.20.00.90	Other (including parts)	Free	-	Section 301
8208.30.00	For kitchen appliances or for machines used by the food industry, and parts thereof	Free	-	Section 301
8208.30.00.30	For meat-slicing, meat-cutting or meat-chopping machines	Free	-	Section 301
8208.30.00.60	Other (including parts)	Free	-	Section 301
8208.40	For agricultural, horticultural or forestry machines, and parts thereof:	Free	-	Section 301
8208.40.30.00	Lawnmower blades	Free	-	Section 301
8208.40.60.00	Other (including parts)	Free	-	Section 301
8208.90	Other:	Free	-	Section 301
8208.90.30.00	For shoe machinery	Free	-	Section 301
8208.90.60.00	Other (including parts)	Free	-	Section 301
8209.00.00	Plates, sticks, tips and the like for tools, unmounted, of cermets	4.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8209.00.00.30	Of sintered metal carbides	Free	-	Section 301
8209.00.00.60	Of other cermets	Free	-	Section 301
8210.00.00.00	Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof	3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211	Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof:	Free	-	Section 301
8211.10.00.00	Sets of assorted articles	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8211.91	Table knives having fixed blades:	Free	-	Section 301
8211.91.10.00	Knives with silver-plated handles	Free	-	Section 301
8211.91.20.00	Valued under 25¢ each, not over 25.9 cm in overall length	0.4¢ each + 6.4%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P,PA, PE,S,SG)	Section 301
8211.91.25.00	Other	0.4¢ each + 6.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8211.91.30.00	Valued under 25¢ each, not over 25.9 cm in overall length	0.9¢ each + 10.6%	Free (AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.91.40.00	Other	0.3¢ each + 3.7%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8211.91.50	Knives with rubber or plastic handles	0.7¢ each + 3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.91.50.30	Steak knives	Free	-	Section 301
8211.91.50.60	Other	Free	-	Section 301
8211.91.80	Other	0.3¢ each + 4.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.91.80.30	Steak knives	Free	-	Section 301
8211.91.80.60	Other	Free	-	Section 301
8211.92	Other knives having fixed blades:	Free	-	Section 301
8211.92.20.00	Kitchen and butcher knives	0.8¢ each + 4.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.92.40	Other	1¢ each + 4.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.92.40.50	Sheath-type knives	Free	-	Section 301
8211.92.40.60	Other	Free	-	Section 301
8211.92.60.00	Hunting knives with wood handles	4.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.92.90	Other	0.4¢ each + 6.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.92.90.30	Kitchen and butcher knives	Free	-	Section 301
8211.92.90.45	Sheath-type knives	Free	-	Section 301
8211.92.90.60	Other	Free	-	Section 301
8211.93.00	Knives having other than fixed blades	3¢ each + 5.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.93.00.31	Folding two-handled multi-use tools in which one or more tools are housed in each handle and one or more of the tools is a folding knife blade	Free	-	Section 301
8211.93.00.35	Pen knives, pocket knives and other knives which have folding blades	Free	-	Section 301
8211.93.00.60	Other (including parts)	Free	-	Section 301
8211.94	Blades:	Free	-	Section 301
8211.94.10.00	For knives having fixed blades	0.16¢ each + 2.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.94.50.00	Other	1¢ each + 5.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.95	Handles of base metal:	Free	-	Section 301
8211.95.10.00	For table knives having fixed blades	0.3¢ each + 4.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.95.50.00	For other knives having fixed blades	0.4¢ each + 6.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8211.95.90.00	Other	3¢ each + 5.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8212	Razors and razor blades (including razor blade blanks in strips), and base metal parts thereof:	Free	-	Section 301
8212.10.00.00	Razors	Free	-	Section 301
8212.20.00	Safety razor blades, including razor blade blanks in strips	Free	-	Section 301
8212.20.00.05	Single edge razor blades for shaving	Free	-	Section 301
8212.20.00.10	Other	Free	-	Section 301
8212.90.00.00	Other parts	Free	-	Section 301
8213.00	Scissors, tailors' shears and similar shears, and blades and other base metal parts thereof:	Free	-	Section 301
8213.00.30.00	Valued not over $1.75/dozen	1.7¢ each + 4.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8213.00.60.00	Pinking shears, valued over $30/dozen	8¢ each + 8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8213.00.90.00	Other (including parts)	3¢ each + 3%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8214	Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, chopping or mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files); base metal parts thereof:	Free	-	Section 301
8214.10.00.00	Paper knives, letter openers, erasing knives, pencil sharpeners (nonmechanical) and blades and other parts thereof	0.3¢ each + 4.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8214.20	Manicure or pedicure sets and instruments (including nail files), and parts thereof:	Free	-	Section 301
8214.20.30.00	Cuticle or cornknives, cuticle pushers, nail files, nailcleaners, nail nippers and clippers, all the foregoing used for manicure or pedicure purposes, and parts thereof	4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8214.20.60.00	In leather containers	Free	-	Section 301
8214.20.90.00	Other	4.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8214.90	Other:	Free	-	Section 301
8214.90.30.00	Cleavers with their handles	1¢ each + 4.9%	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8214.90.60.00	Other	0.2¢ each + 3.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8214.90.90.00	Other (including parts)	1.4¢ each + 3.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215	Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware; and base metal parts thereof:	Free	-	Section 301
8215.10.00.00	Sets of assorted articles containing at least one article plated with precious metal	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8215.20.00.00	Other sets of assorted articles	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8215.91	Plated with precious metal:	Free	-	Section 301
8215.91.30.00	Forks	Free	-	Section 301
8215.91.60.00	Spoons and ladles	4.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.91.90.00	Other (including parts)	2.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.99	Other:	Free	-	Section 301
8215.99.01.00	Valued under 25¢ each, not over 25.9 cm in overall length	0.9¢ each + 15.8%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.99.05.00	Other	0.5¢ each + 8.5%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8215.99.10.00	Valued under 25¢ each	0.5¢ each + 6.3%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.99.15.00	Other	0.4¢ each + 4.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8215.99.20.00	With rubber or plastic handles	0.5¢ each + 3.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.99.22.00	Without their handles	Free	-	Section 301
8215.99.24.00	Table forks (including table serving forks) and barbecue forks with wooden handles	0.3¢ each + 4.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.99.26.00	Other	0.2¢ each + 3.1%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8215.99.30.00	Spoons valued under 25¢ each	14%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.99.35.00	Other	6.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	Section 301
8215.99.40	With base metal (except stainless steel) or nonmetal handles	5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301
8215.99.40.30	Tablespoons and table ladles	Free	-	Section 301
8215.99.40.60	Other	Free	-	Section 301
8215.99.45.00	Other	Free	-	Section 301
8215.99.50.00	Other (including parts)	5.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	Section 301

Need a product-level review with tariff logic and country-specific duties?

Go to Tariff Search

Last verified and sources

Last verified: June 2, 2026

Rates and trade context on this page are checked against official tariff, customs, trade-policy, and import-data sources. Use the calculator for an item-specific duty stack before making entry, quote, or purchase decisions.

USITC HTS

Harmonized Tariff Schedule classifications and base duty rates.

Federal Register

Presidential proclamations, trade-remedy notices, and rule changes.

CBP

Customs entry, fee, ruling, and enforcement guidance.

USTR

Section 301 and trade-policy program source material.

Census trade data

US import value and origin-country trade data.

View Chapter 82 trade data & analysis →